Hydrotechnik S110-AC-AC-05.00 Pressure hose
1. Product Overview
Brand: Hydrotechnik
Model: S110-AC-AC-05.00
Type: Ultra-flexible high-pressure test hose (with quick-connect connector)
Core features: Lightweight design + pulse tolerance + quick connection
Pressure rating: 700 bar (peak) / 400 bar (working pressure)
2. Structural parameters
(1) Hose body
Inner diameter: 5 mm (standard)
Reinforcement layer: 4 layers of steel wire braiding (pulse resistance ≥ 5 million times)
Material:
Inner tube: polyamide (resistant to mineral oil/bio-oil)
Coating: polyurethane (PUR, wear-resistant/UV-resistant)
Bending radius: ≤50 mm (dynamic use)
(2) Connector configuration
Interfaces at both ends: AC type quick-connect male connector (ISO 16028 standard)
Sealing method: Metal-to-metal cone seal (zero leakage)
Optional variants:
One end AC quick-connect, one end G¼" thread (such as S110-AC-G-05.00)
(3) Performance indicators
Temperature range: -40°C to +100°C (short-term +120°C)
Flow limit: 15 L/min (at 5mm inner diameter)
Burst pressure: 2100 bar (safety factor ≥3:1)
3. Core advantages
✔ Extremely low ductility: volume expansion under pressure <1% (to ensure test accuracy)
✔ 360° rotation: The connector can be rotated freely to avoid torque transmission
✔ Plug and play: No tools required, connection completed in 1 second
✔ Easy to clean: Smooth inner wall, quick to blow off residual oil
4. Typical applications
Hydraulic testing: pressure detection of construction machinery/wind power hydraulic system
Equipment calibration: on-site calibration of pressure sensor/transmitter
Laboratory: connection of high-pressure fluid pulse test bench
Mobile equipment: portable pressure gauge with matching hose
5. Selection guide
Model code analysis S110 AC-AC 05.00
Meaning Serial number Double quick plug Inner diameter 5mm
Other options:
Customized length (standard 1m, optional 0.5~10m)
Food grade version (white PUR, FDA compliant)
6. Safety tips
Prohibited uses:
Compressed air (prone to bursting pipes)
Corrosive media (such as phosphate ester hydraulic oil)
Scrap standards:
Exposed steel wires at ≥3 locations on the outer layer
Loose joints or scratched sealing surfaces
7. Supporting recommendations
Protective kit: Helical spring sheath (anti-mechanical wear)
Suspension bracket: Magnetic hose holder