Hydrotechnik 8824-C1-02.50 measuring cable
Product Description
1. Product Overview
Brand: Hydrotechnik
Model: 8824-C1-02.50
Type: Industrial-grade sensor measurement cable (designed for high-precision signal transmission)
Application: Pressure, temperature, flow sensor signal transmission, industrial automation system
2. Core Features
(1) Electrical and structural parameters
Conductor: 4-core tinned copper stranded wire (0.25mm²/AWG24, low impedance)
Shielding: Aluminum foil + tinned copper braid (double shielding, anti-EMC/RFI interference)
Insulation/sheath:
Inner insulation: PVC (withstand voltage 600V)
Outer sheath: PUR (polyurethane, oil-resistant, wear-resistant, and bending-resistant)
Rated voltage: 300V AC/DC
Temperature range: -40°C to +90°C (up to +105°C for a short period of time)
(2) Connector configuration
Sensor end: M12×1 male connector (4-pin, A-coded, IP67 protection)
Device end: open wire tail (can be connected to a junction box or PLC module)
Optional variants:
Device end M12 female connector (directly connected to the transmitter)
Customized pin definition (such as power + signal separation)
(3) Mechanical and environmental adaptability
Length: 2.5 meters (standard model, customizable 1~50 meters)
Outer diameter: about 5.5mm (flexible design, minimum bending radius 50mm)
Protection level: IP67 (1 meter underwater/30 minutes anti-immersion)
Chemical resistance: resistant to hydraulic oil, coolant, weak acid and alkali
3. Product advantages
✔ High reliability: industrial-grade shielding, suitable for strong interference environments such as inverters and servo motors
✔ Plug and play: standardized M12 interface, compatible with Hydrotechnik's full range of sensors (such as pressure transmitter 3403, flow meter 31V7)
✔ Long life: PUR outer sheath is resistant to mechanical stress and suitable for drag chains/mobile equipment (5 million bending cycles)
✔ Quick deployment: pre-assembled connectors reduce on-site wiring time
4. Typical applications
Hydraulic system: connect pressure sensor to PLC (such as injection molding machine, construction machinery)
Process control: flow meter/temperature sensor signal transmission (chemical, energy industry)
Test bench: high-precision data acquisition equipment connection
OEM integration: embedded in industrial equipment as a standard signal harness
5. Selection Note
Special requirements:
High temperature type (silicone sheath, -60°C to +200°C)
Explosion-proof certification (ATEX/IECEx, model suffix required)
Armored version (stainless steel braided layer, rodent-proof)
Compatibility:
Match with Hydrotechnik 8824 series adapter (such as 8824-A1 extension cable)
6. Recommended accessories
M12 protective cover (dust and water proof, protect the interface when not in use)
Cable fixing head (such as M16 armored locking connector)