20 l/min, 75 l/min, 300 l/min and 600 l/min aluminium flow turbines for accurate flow measurement of mineral oils up to 100cst & up to 420 bar operating pressure. Analogue 4-20mA signal output. Optimised for use with Hydrotechnik measuring instruments and fitted with pressure & temperature test points allowing for flow, pressure & temperature measurements at one point. Standard calibration on 30cst for oils, other viscosities on request. Models available for Skydrol.
ISDS automatic sensor detection when used with MultiHandy and MultiSystem measuring instruments.
| Measuring range (l/min) | Signal output | Max. Pressure (bar) | Accuracy (%) | Connection | Part Number |
|---|---|---|---|---|---|
| 1...20 | 4...20mA | 420 | ±0.5 (±2.5) | 1/4" BSP Female | 31JH-02-35.030 |
| 2 (7.5)...75 | 4...20mA | 420 | ±0.5 (±2.5) | 3/4" BSP Female | 31JH-70-35.030 |
| 9 (15)...300 | 4...20mA | 420 | ±0.5 (±2.5) | 1" BSP Female | 31JH-71-35.030 |
| 15 (25)...600 | 4...20mA | 350 | ±0.5 (±2.5) | 1.1/4" BSP Female | 31JH-72-35.030 |
Values shown in brackets are flow ranges or accuracies without ISDS or linearisation.
QT500 Aluminium Flow Turbine for oils with ISDS and standard frequency output - our most popular flow rate measuring product
QT510 Aluminium Flow Turbine for oils with ISDS and standard 4-20mA output - our most popular flow rate measuring product
QT500 Stainless Steel Flow Turbine for water-based fluids with ISDS and standard frequency output
QT510 Stainless Steel Flow Turbine for water-based fluids with ISDS and standard 4-20mA output