Winner Solenoid Valve EP-08W-2A-05-M-05 This is a pilot-operated, poppet type, 2-way 2-position, normally closed solenoid valve, designed for low flow applications requiring extremely fast response times and virtually zero internal leakage. When energized, flow is allowed in both directions. When de-energized, it allows flow from port 1 to port 2, while flow port 2 to port 1 is restricted by the check valve.
Continuous-duty rated coil.
Efficient wet-armature construction.
The valve allows for faster response times with very small flow, or even virtually zero flow.
Working parts are heat-treated and high-precision ground to increase hardness for long life and essentially zero leakage.
A variety of seal kit materials for different applications, see seals information under Technical Reference.
Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
Winner guarantees that all products performance a 100% functional test before shipment.
| Cavity | 08W-2 |
|---|---|
| Rated Flow | 40 L/min |
| Maximum Operating Pressure | 350 bar |
| Fluid Temperature Range | -40 to 120 ℃ (-40 to 248 ℉) |
| Maximum Leakage Approximately | 0.15 cc/min (3 drops/ min) at 350 bar |
| Salt Spray Test to DIN EN ISO 9227:2017-07 | Exceed 1000 Hours |
| Solenoid Valve Hex Size | 24 mm |
| Solenoid Valve Installation Torque | 39 - 51 Nm |
| Locknut Torque | 2 - 3 Nm |
| Weight | 0.13 kg (Z=N) |
| Mounting Position | Unrestricted |
| Coil Type | EC-04W |
| Supply Voltage | 90% of nominal |
| Power Supply | 20W |