ABB CLMD13/15KVAR 400V50HZ Capacitor
The CLMD13 is designed to allow users to easily connect container units in parallel.
The CLMD13 base unit is ideal for standard systems.
Frequency: 50 Hz
Connection 3-phase connection is standard (single-phase connection requires special instructions)
Discharge resistor Internal discharge resistor is permanently connected to ensure safe discharge of capacitors and voltage reaches less than 50V within 1 minute after switching off
(CLMD33 does not include discharge resistor)
Terminals:
- CLMD13: three M6 terminals
Grounding - CLMD13: fixed external grounding in the housing
Cable output:
Through the opening: CLMD13: 22.5mm
Material of the housing: galvanized steel sheet
Fixing:
- CLMD13: with two slots, diameter 6.5mm (suitable for installing modular components)
Execution Indoor (outdoor, on request)
Protection class IP 42 (IP 54, on request)
Maximum ambient temperature Category "D" (+ 55 °C) according to IEC 60831
Minimum ambient temperature - indoor version: -25 °C
- outdoor version ：-40 ℃
Minimum distance between devices:
- CLMD13: 20mm
Minimum distance between device and wall
- CLMD13: 20mm
Loss
At rated voltage of 380V and above
- Including discharge resistor, less than 0.5 W/kvar
- Excluding discharge resistor, less than 0.2 W/kvar
Capacitance tolerance - 0% + 10%
Voltage test - Between terminals: 2.15Un for 10 seconds
- Between terminals and ground: 3kV for 10 seconds
Overload capacity:
- Overvoltage tolerance: intermittent, maximum 10%
- Overcurrent tolerance: continuous, 30%
- Maximum overload: rated current when working steadily at 135% (generated by overvoltage and harmonics)