Elektror SD3 Side channel blowers
It is one of the core products of the German Elektror brand and belongs to the side channel blower category. This series of blowers works on the principle of side channel compressors, which can generate high pressure differences and relatively small volume flow rates, and is suitable for industrial applications that require high pressure but moderate flow rates.
1. Core parameters:
Model: SD3 series (such as SD3-XX, the specific model depends on the configuration)
Pressure difference: A maximum differential pressure of 750 mbar (75,000 Pa) can be generated.
Volume flow rate: Up to 1,150 m³/h.
Power range: Depending on the model, the power ranges from 550W to 2.2kW (such as the SD3 basic model motor power is 550W).
Voltage: Supports 230V/400V dual voltage, frequency 50Hz/60Hz.
Speed: The maximum speed can reach 2,850 r/min (such as the SD3 basic model speed is 2,850 r/min).
Material: Aluminum casting, steel and stainless steel materials ensure durability and corrosion resistance.
Protection level: Usually IP54 or higher, suitable for harsh industrial environments.
2. Product features:
High pressure generation: Through the side channel compressor principle, the air is squeezed outward by centrifugal force when the impeller rotates, and is compressed again through the side channel return flow to achieve secondary compression, thereby generating a high pressure difference.
Compact design: Compact structure, small footprint, easy installation and integration into existing systems.
Low noise operation: Optimized design reduces operating noise, suitable for places with strict noise requirements.
Frequency conversion compatibility: Supports speed adjustment through frequency converter, realizes precise control of air volume and pressure, and achieves energy saving effect at the same time.
Corrosion resistance: The housing and key components are made of stainless steel or special coating treatment, which is suitable for humid and corrosive environments.
Easy maintenance: Modular design facilitates quick replacement of worn parts and reduces maintenance costs.